What parameters should be taken into account when choosing ultra filtration membranes?

1 answer

The 01/12/2023

Hello

To choose the ultrafiltration membranes (material, filtration mode, etc.) and the system to be implemented (process with/without regeneration, mode and type of cleaning, etc.), you should send us the information on the application. , flow rates and quality of the effluent to be treated (turbidity or suspended solids, temperature of the fluid to be treated, organic matter content, etc.). We can provide you with a list of the parameters to provide and advise you on the choice of membranes.

Cordially

Isabelle Duchemin contact@polymem.fr

Questions on the same topic

What industries benefit most from advanced wastewater treatment technologies ?

The 10/04/2024 - 1 response

Last response: Les technologies avancées de traitement des eaux usées sont particulièrement bénéfiques dans plusieurs secteurs industriels. Read more

Offering filtration with a bacterial consortium seeded on lithothamne, coupled with UVc, some swimming pool algae remain intractable without chemistry. We were thinking of adding a copper electrolyser or a UV-Ox device. Is this allowed for ERPs?

The 01/17/2023 - 2 responses

Last response: Hello, to make it short there are two situations: either the swimming pool is a swimming pool, that is to say disinfected and disinfecting water (therefore de facto chlorinated), or it is an atypical... Read more

What is RE-USE of process water? Is it allowed in every country?

The 01/24/2023 - 2 responses

Last response: Hello, RE-USE and RE-UTE (Reuse of Treated Wastewater) are governed by French and European legislation. The recent evolution of European legislation (May 2020) opens the field of possibility for the... Read more

What is the impact of mineral ions on water purification?

The 04/24/2023 - 1 response

Last response: Les ions minéraux jouent un rôle crucial dans les procédés de purification de l'eau, influençant divers aspects technico-chimiques. Read more

For the treatment of micropollutants, is the cost of membrane techniques higher than that of adsorption and/or oxidation solutions?

The 11/16/2020 - 2 responses

Last response: Hello, with the filter media available, there could also be a third way, that of dry filtration. This only requires the removal of micropollutants, without adding other materials. Read more

Is water with turbidity greater than 10 NTU and MO greater than 15 suitable for the ultrafiltration process?

The 03/06/2023 - 1 response

Last response: Hello, Ultrafiltration can be adapted to the treatment of this water; however, the maximum turbidity must be validated (average and peak values / the limits are around 100 and 300 mg/l respectively). Read more

How to clean and disinfect a polyethersulfone ultrafiltration membrane?

The 04/11/2019 - 1 response

Last response: Pour le nettoyage et la désinfection d'une membrane d'ultrafiltration en polyéthersulfone (PES), il est primordial d'adopter des procédures adaptées pour préserver l'intégrité et la performance de la... Read more

What is the procedure for cleaning the membranes?

The 10/25/2022 - 2 responses

Last response: Hello, I invite you to refer to the manufacturer's recommendations: the cleaning procedures may differ depending on the membranes and the quality of the water treated.

How does water nanofiltration work?

The 06/25/2021 - 1 response

Last response: La nanofiltration de l'eau repose sur une membrane semi-perméable qui permet le passage de l'eau et de certains ions tout en retenant les particules plus grandes et les solutés spécifiques. Read more

What is the correct procedure for feeding spiral wound membranes for leachate? In parallel or in series?

The 04/02/2019 - 1 response

Last response: La configuration optimale pour l'alimentation des membranes spiralées, notamment dans le traitement des lixiviats, dépend de plusieurs facteurs, tels que la qualité du lixiviat, la pression requise... Read more