Visuel deD3IL10 Water-powered proportional dosing pump

This product is recommended for

  • dosing of soluble cutting oil into CNC or conventional machine supply tanks
  • mixing of cutting oil emulsions with water
  • injecting of metalworking additives into coolant preparation lines

Description

The DOSATRON® D3IL10 is a water-powered proportional dosing pump designed for metalworking coolant preparation, providing reliable and constant dosing of soluble cutting oil and other additives directly into the water supply tanks of one or several conventional or CNC machines. Driven solely by the hydraulic energy of the water flow, it injects concentrate proportionally to the passing water volume, helping to maintain a stable mixing ratio even when operating conditions vary.

The D3IL10 features an externally adjustable dosing rate from 1% to 10% (1:100 to 1:10), allowing both low-dosage tank top-ups and higher-dosage fillings. Its operating range supports water flows from 10 l/h up to 3 m³/h at 0.5 to 6 bar, with a concentrated additive injection capability from 0.1 to 300 l/h and a stroke volume of approximately 0.53 l. For machining-focused performance, the D3IL10 is equipped with an emulsifying washer to improve emulsion quality, a 2.75 m suction hose to accommodate various containers (e.g., IBC or 200 l drum), and a standard viscous kit intended to help maintain dosing accuracy despite viscosity changes linked to ambient temperature. Viton (VF) seals are specified as compatible with soluble cutting oils, and the unit is designed for plug-and-play installation to reduce dosing errors and support consistent coolant concentration control.

Characteristics general

CharacteristicValue
Concentrated additive injection 0.1 - 300 l/h
Injection range 1 - 10 %
Maximum operating temperature 40 °C
Operating water pressure 0.5 - 6 bar
Overall width 16 cm
Stroke volume ~ 0.53 l
Suction hose length 2.75 m
Total height 53.8 cm
Unit diameter 11.2 cm
Unit Weight 2 kg
Water flow range 10 l/h - 3 m³/h

FAQ - Key Information

What is the injection range for the water-powered proportional dosing pump D3IL10?

The injection range for the water-powered proportional dosing pump D3IL10 is 1 - 10%.

What is the water flow range for the water-powered proportional dosing pump D3IL10?

The water flow range for the water-powered proportional dosing pump D3IL10 is 10 l/h - 3 m³/h.

What is the operating water pressure range for the water-powered proportional dosing pump D3IL10?

The operating water pressure range for the water-powered proportional dosing pump D3IL10 is 0.5 - 6 bar.

What is the concentrated additive injection range for the water-powered proportional dosing pump D3IL10?

The concentrated additive injection range for the water-powered proportional dosing pump D3IL10 is 0.1 - 300 l/h.

What is the stroke volume for the water-powered proportional dosing pump D3IL10?

The stroke volume for the water-powered proportional dosing pump D3IL10 is approximately 0.53 l.

What is the maximum operating temperature for the water-powered proportional dosing pump D3IL10?

The maximum operating temperature for the water-powered proportional dosing pump D3IL10 is 40 °C.

What is the unit diameter of the water-powered proportional dosing pump D3IL10?

The unit diameter of the water-powered proportional dosing pump D3IL10 is 11.2 cm.

What is the total height of the water-powered proportional dosing pump D3IL10?

The total height of the water-powered proportional dosing pump D3IL10 is 53.8 cm.

What is the overall width of the water-powered proportional dosing pump D3IL10?

The overall width of the water-powered proportional dosing pump D3IL10 is 16 cm.

What is the weight of the water-powered proportional dosing pump D3IL10?

The weight of the water-powered proportional dosing pump D3IL10 is 2 kg.

What is the suction hose length for the water-powered proportional dosing pump D3IL10?

The suction hose length for the water-powered proportional dosing pump D3IL10 is 2.75 m.

News around the D3IL10 :

Logo DOSATRON DOSATRON
added an article where it is cited D3IL10
Today at 14:22

Maintaining proportional chemical dosing accuracy on variable-flow water networks: hydraulic limits, pressure effects, and additive properties

Today at 14:22

Variable-flow water networks (irrigation manifolds, livestock watering, building services, industrial wash lines, mobile CIP skids) expose proportional dosing systems to pressure and flow transients, evolving pressure losses and suction-side constraints. This technical guide explains why ratio control drifts in the field, how pressure, backpressure and refill dynamics affect water-driven proportional dosing pumps, and how additive properties (viscosity, outgassing, crystallization, compatibility) can reduce volumetric efficiency. It also provides engineering practices to stabilize dosing, verify concentration correctly, and separate true injection accuracy from process residual behavior.

Image D3WL3000
Image D3WL3000 IE NSF
Image D3IL10
2 activity(ies)