I am looking to equip myself with measuring devices in order to be autonomous in our noise measurements. What do you recommend?
4 answers
Hello,
It all depends on the type of measurements you want to make...
If it is a question of regulatory measures, an "expertise" class device, therefore rather expensive, is necessary...
Afterwards, if your needs are different, simpler and less expensive solutions exist.
You can contact me on 06 14 59 27 12 or by email at d.berrier@sim-engineering.com
cdt
David BERRIER
Hello,
Consider TES-1151 device.
Sound level meter - TES-1151 (diagnostic-cem.shop)
Description :
The TES-1151 professional sound level meter allows you to precisely measure the noise level in your environment, indoors or outdoors. This acoustic measurement instrument (decibel meter) has a large LCD screen, its measurement range extends from 30 dB to 130 dB for sound frequencies between 31.5 Hz and 8 kHz. The TES-1151 works with a 9V alkaline battery.
Technical characteristics :
- Measurement range: 30dB - 130dB
- Measurement resolution: 0.1dB
- Frequency weighting: A, C and Z
- Frequency range: 31.5Hz - 8kHz
- Dimensions: 246 x 64 x 26 mm
- Weight: 280g
- Standards: IEC 61672-1 Type2, ANSI S1.4 Type2
- Back-screw for tripod fixture (tripod not included)
- Internal memory for recording measurements: microSD memory card
- Micro USB interface
Equipment provided:
- A TES-1151 sound level meter
- A carrying case padded with foam inside
- USB cable, PC software.
- User manual in English
- A 9V alkaline battery
Sound level meter - TES-1151 (diagnostic-cem.shop)
Best regards.
Equipment provided:
- A TES-1151 sound level meter
- A carrying case padded with foam inside
- USB cable, PC software.
- User manual in English
- A 9V alkaline battery
Sound level meter - TES-1151 (diagnostic-cem.shop)
Hello,
Consider this measuring device :
Sonomètre - Décibelmètre TES-1151 (diagnostic-cem.shop)
Best regards
Hello. Sound level meters are regulated measuring instruments. They must comply with the 61672 standard and be approved by the LNE. It is better to seek manufacturers capable of meeting these requirements: B&K, Norsonic, 01dB, Cirrus...
List available here: https://www.lne.fr/recherche-certificats/accueil?lang=FR&prov=LNE#bottom-pager
Choose "Pronounced certificates [....] French regulations [...]
Then choose the instrument category "Sound level meters".
The full list is provided.
Questions on the same topic
What acoustic solutions are there for nursing homes?
Last response: Hello, If you want biosourced and aesthetic solutions, do not hesitate to contact us via our contact form: https://www.pytaudio.com/contact/ Beautiful day, Good for you
I seek to reduce the sound generated by sound projectors of round shapes. Do you have a solution?
Last response: Hello Is it an embarrassment felt concerning the sound volume in general, or by zone? Call us to better understand your needs on 06 25 35 64 50 / ACOUSTIKA
We work next to 3 industrial farms with a ventilation system at the gable end of the 3 buildings (large fans) that overlook our offices. What solutions could be considered to reduce noise pollution?
Last response: Hello, It is necessary to call on a company capable not only of measuring and carrying out an acoustic study, but also of sizing the equipment you will need. Read more
How to reduce blower noise from a car wash dryer?
Last response: Hello, If the noise problem affects local residents, enclosure would be the best solution, acoustic walls are much less effective. Read more
What are the steps and steps for dealing with noise pollution?
Last response: Hello, You must first contact a BET in acoustic engineering to make an assessment of the nuisances in comparison with the regulations. Then, the latter will make prescriptions. Read more
I am looking for equipment capable of detecting a specific sound (for example aircraft noise). Recommendations?
Last response: Hello, regarding aircraft noise, it depends. Suppose you are a homeowner annoyed by planes passing close to your home. In that case, any good quality sound level meter can help you analyse precisely... Read more
What equipment is needed to carry out an acoustic study of noise prevention? Is it possible to rent it? Or is a service possible?
Last response: Hello, Renting measuring equipment is possible but it takes a minimum of knowledge of acoustics to use the measurements.... You can contact me on 06 14 59 27 12 or by email d.berrier@sim-engineering. Read more
Is there legally a notion of "compatibility" between habitat and artisanal zone? If so, how is it assessed?
Last response: Hello, Noise from industrial or craft activities is effectively regulated with respect to the neighborhood: - Order of January 23, 1997: The regulated emergence zones (ZER) concern: • the interior of... Read more
Who can offer an acoustic measurement service? What parameters should we provide?
Last response: Hello, We can offer you acoustic measurement services. Please contact me at: 06 82 02 23 88 Benjamin Poirier Acoustic engineer mapson
How to determine what is the most suitable treatment to limit noise pollution please?
Last response: You must first go through an acoustic study carried out by a specialist. At your disposal to discuss it. cdt David BERRIER d.berrier@sim-engineering.com 06 14 59 27 12