What is the maximum rotational speed of a star screen?
1 answer
Il est crucial de respecter les recommandations du fabricant pour éviter l'usure prématurée ou les dommages mécaniques. Des facteurs comme l'alignement des arbres, l'état des étoiles (polyuréthane, caoutchouc, etc.), et le couple moteur jouent également un rôle déterminant. Une vitesse excessive peut entraîner une réduction de l'efficacité de séparation et augmenter le coût d'entretien. Pour optimiser les performances, il est recommandé d'utiliser des moteurs à vitesse variable permettant un ajustement précis de la rotation en fonction des matériaux et des conditions opérationnelles.
Questions on the same topic
What parameters should be taken into account when sizing a trommel screen? diameter, length, torque, power...
Last response: Hello , Contact us and we will discuss your specifications, each need requires reflection, and depending on your volumes and materials, we adapt our trommels WWW.TPRE.FR
What is the difference between crushing and grinding?
Last response: We rather speak of crushing for the coarse particle size reduction (exp: from the quarry block to granules of a few millimeters), and of grinding for the particle size reduction in the powder phase. Read more
I have waste larger than 150mm and I would like to reduce its size. A hammer mill will be inefficient for the rocks and a crusher requires to separate the waste). What solutions do you recommend for shredding this mixed waste?
Last response: Hello, Could you specify the nature of the materials to be crushed? If I understand correctly, you have rock type materials, with metal inclusions? therefore not crushable? Read more
What parameters should be taken into account when choosing a trommel for rubble and demolition waste?
Last response: Hello a trommel screen for the rubble and demolition waste recycling sector is subject to specific constraints due in particular to the specific weight of this waste, its size (concrete blocks or... Read more
What are the differences between scalper, crusher, impactor and screener?
Last response: Hello, A scalper: is equipment used upstream of a separation process to remove the finest particles that are sometimes harmful to the rest of the process. Read more
What is a scalper? Is there a difference between a screen and a scalper?
Last response: Un scalper, dans le contexte industriel, est un équipement de traitement des matériaux utilisé pour séparer et éliminer les particules non désirées ou de grande taille d'un flux de matériau. Read more
Which screen to use for street sweeping waste?
Last response: hello we use screening buckets. our cups make it possible to separate the fines from the largest elements 0/10mm. it is particularly interesting for low volumes because the cost is low (about 1$ per... Read more
On a construction sorting center, what kind of screen would you recommend to obtain a clean 6/10 with wet products?
Last response: Hello, It is difficult to give you a point-blank answer, because the answer is conditioned by the capacity, the input particle size, the nature of the input products and whether they contain clays or... Read more
What parameters should be taken into account when choosing a mobile sand screening unit?
Last response: Lors de la sélection d'une unité mobile de criblage de sable, plusieurs paramètres techniques doivent être pris en compte : 1. Read more
For a screener, is the screening throughput necessarily linked to the screening area? What will be the maximum flow rate (m3/h) possible?
Last response: Hello, It's a very interesting question. You have to look at several factors: 1 - The approach to your product, size, density, humidity, shape, above all do not neglect the apparent and real... Read more